Category Page Header Interior

With Detail Interior Cleaner, you can get a professional interior detail at your home.

  • Can be used on most interior or exterior surfaces to remove ingrained dirt, dust, fingermarks, stains, grease and grime.
  • Is excellent for cleaning hard to access areas like door jams, foot wells and under bonnet and boot lids where water rinsing is not practical.
  • Quick and easy to use, as it comes ready to use, with no dilution required.

Formulated to clean all types of plastic, vinyl, cloth, carpet, leather, and rubber surfaces in the interior of your car.

Size Code

  1. Spray Detail liberally onto a clean cloth or directly onto the surface to be cleaned.
  2. Wipe with a clean cloth if applied directly.
  3. For stubborn stains on upholstery or carpet, re-apply, allow to penetrate for 30 seconds then agitate gently with a brush or sponge and remove any excess with a damp clean cloth.

Shield will apply a protective and conditioning coating to help protect the surface from fading or cracking keeping it supple and looking like new.

  • Protects the surface from fading or cracking        
  • Deodorises and freshens interior              
  • Non-oily, long lasting finish         
  • Revives and beautifies surfaces

Can also be used on the car exterior for bumper bars and trim.

Size Code

  1. Spray Shield either directly onto the surface to be treated or a clean cloth.
  2. Wipe evenly to achieve a smooth clear finish.
  3. If necessary, re-apply to areas which have become weathered and porous.

Formulated to deodorise & disinfect the heating, ventilation and air conditioning system and freshen the vehicle’s interior by eliminating bacterial and fungal growth.

  • Quick and easy to use, one application per treatment      
  • Eliminates odours fast   
  • Disinfect your air conditioning system    
  • Fresh Citrus Scent

Suitable for use in cars, 4WD’s trucks, vans & recreational vehicles.

Size Code

  1. Start vehicle engine.
  2. Set fan at low speed.
  3. Turn A/C ON and set temperature at around 22°C or normal driving comfort temperature.
  4. Set air flow through centre dashboard vents only.
  5. Set to Recirculate mode. Close all windows.
  6. Shake can well before use.
  7. Place can upright on the floor of the vehicle’s front passenger seat, underneath the suction air vent, ensuring can is NOT pointing upwards towards the windscreen.
  8. Keeping away from body & face, ACTIVATE can by pressing the nozzle down until it is locked.
  10. Leave for 10 minutes.
  11. Open windows and ventilate for 10 min prior to vehicle entry.